Driving and operating 157
Setting cruise control
1. Press m.
m illuminates white.
2. Accelerate to the desired speed
(above 40 km/h).
3. Rotate the wheel towards SET/-
and release.
m illuminates green.
4. Take your foot off the accelerator
pedal.
Increasing set speed
1. Rotate the wheel towards RES/+
and hold it.
The vehicle will accelerate.
2. Release the wheel at the desired
speed.
3. Rotate the wheel towards RES/+
and release it immediately.
The speed will increase by
1-2 km/h.
Decreasing set speed
1. Rotate the wheel towards SET/-
and hold it.
The vehicle will decelerate.
2. Release the wheel at the desired
speed.
3. Rotate the wheel towards SET/-
and release it immediately.
The speed will decrease by
1-2 km/h.
To temporarily accelerate
When the cruise control is on:
1. Press the accelerator pedal.
Note
Increasing speed will not
interfere with cruise control
operation or change the set
speed.
To return to the set speed:
1. Take your foot off the accelerator
pedal.
Temporary deactivation
Do one of the following:
• Press
Ø
.
• Reduce vehicle speed below
approximately 40 km/h.
• Press the brake pedal or press
the clutch pedal.
m illuminates white.
Resume stored speed
When the cruise control has a
desired speed previously set:
1. Press RES/+.
The most recently set speed will
automatically resume.
Deactivation
1. Press m.
m extinguishes.
To Next Page
Loading...
