160 Driving and operating
Rear Vision Camera
(RVC)
The rear vision camera (RVC)
system is designed to assist the
driver when reversing by displaying
a view of the area behind the
vehicle.
The RVC cannot display objects:
• Close to the corners of the
vehicle.
• Forward of the camera.
• Higher than the camera.
Note
• The distance of the objects seen
on the display differs from the
actual distance.
• The area displayed depends on
the road condition and vehicle
orientation.
Warning
Never rely solely on the rear
vision camera when reversing
the vehicle. There are blind spots
that cannot be sensed by the
camera.
The rear vision camera is not
intended to replace the driver’s
judgment or attention toward
the rear of the vehicle when
reversing.
Before entering the vehicle,
always check the area around
the vehicle is clear of obstacles
and people.
Always perform head checks and
use the vehicle’s mirrors when
reversing.
If the vehicle sustains any
damage in the area of the rear
vision camera, the camera may
become misaligned. Contact a
Holden Dealer.
Activation
When the ignition key is in the ON
position and the vehicle is shifted
into R (Reverse), the rear vision
camera image is displayed on the
infotainment display.
Once the vehicle is shifted out of
R, the infotainment system display
returns to the previous screen.
Guidelines
When the camera image is displayed,
dynamic guidelines are also displayed
to assist with reversing the vehicle.
To Next Page
Loading...
