Vehicle care 185
Bulb replacement
Contact a trained service technician
if unsure about the bulb replacement
process.
When replacing bulbs:
• Turn the ignition off and remove
the key.
• Turn off related switches.
• Fit bulbs of the specied
wattage only.
• Do not touch bulbs or reectors
with bare hands.
• Clean stained bulbs with
methylated spirits.
Bulbs to be changed by
a Holden Dealer
• Side turn signal lamps.
• Centre High Mounted Stop Lamp
(CHMSL).
• Fog lamps.
• LED Daytime running lamps.
• LED Tail lamps.
Caution
Condensation may temporarily
appear on the inside of exterior
lamp lenses after rain or washing
the vehicle. Condensation occurs
when there is a temperature
difference between the inside and
outside of the lamp allowing a
ne mist on the inside surface of
the lamp lens. This condensation
will disappear when the vehicle is
in a dry environment or the lamp
is on. If water does collect in the
lamp contact a Holden Dealer.
Headlamps
1. Low and high beam headlamp
2. Front turn signal lamp
To Next Page
Loading...
