Seats, restraints 53
ISOFIX child restraint systems
Fasten vehicle-approved ISOFIX
child restraint systems to the ISOFIX
mounting brackets.
Note
Ensure the seat belt buckles are
placed out of the way of the child
seat.
ISOFIX mounting brackets are
indicated by a label on the seatback,
as shown. In addition to the ISOFIX
mounting, fasten the top-tether straps
to the top-tether anchorage points.
Top-tether child restraint systems
0
53
Top-tether child restraint
systems
A. Front of vehicle
The child restraint tether anchors
are located at the rear of the load
compartment, in line with the three
rear seating positions.
Note
Use the child restraint anchors for
their designed purpose only.
Child restraint installation
The vehicle has been designed to
accommodate child restraints on the
rear seat.
When using a child restraint, read
the installation instructions supplied
with the child restraint and follow the
directions for tment carefully.
The child restraint system should
be secured in conjunction with the
vehicle’s seat belt.
Secure the child in the restraint in
accordance with the manufacturer’s
instructions.
If unsure about installing a child
restraint anchor tting, contact an
approved restraint tting station or a
Holden Dealer.
To Next Page
Loading...
