88 Lighting
Headlamp high/low beam
To activate high beam:
1. Turn the headlamps on.
2. Push the lever forwards.
The high beam indicator lamp
$ illuminates on the instrument
cluster.
To return to low beam:
1. Push the lever again or pull the
lever rearward.
Warning
Always switch the headlamps
to low beam when vehicles are
approaching or when following
another vehicle.
To ash the high beam lamps:
1. Pull the lever towards the rear of
the vehicle and release.
The lamps stay on for as long as
the lever is held.
Headlamp range
adjustment
Adjust the headlamp range
according to vehicle load, to ensure
illumination of the road ahead.
Press 9 to withdraw the switch,
rotate to the recommended position
and then press it back in place:
0: Front seats occupied
1
: All seats occupied
2: All seats occupied and load
compartment laden
3
: Driver’s seat occupied and load
compartment laden
To Next Page
Loading...
