Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
111
Map Data Updates
The map data in the vehicle is the
most up-to-date information
available when the vehicle was
produced. The map data can be
updated, provided that the map
information has changed.
For questions about the operation of
the navigation system or the update
process, contact your dealership.
Database Coverage
Explanations
Coverage areas vary with respect to
the level of map detail available for
any given area. Some areas feature
greater levels of detail than others.
If this happens, it does not mean
there is a problem with the system.
As the map data is updated, more
detail can become available for
areas that previously had limited
detail. See Map Data Updates
0 111.
Voice Recognition
Voice recognition allows for
hands-free operation within the
navigation, audio and phone
applications. This feature can be
started by pressing either the
g
button on the steering wheel or
touching
g on the touchscreen
display.
However, not all features within
these areas are supported by voice
commands. Generally, only complex
tasks that require multiple manual
interactions to complete are
supported by voice commands.
For example, tasks that take more
than one or two button presses such
as selecting a song or artist to play
from a media device would be
supported by voice commands.
Other tasks, like adjusting the
volume or seeking up or down are
audio features that are easily
performed by pressing one or two
buttons, and are not supported by
voice commands.
Voice recognition can be used just
when the ignition is on.
Using Voice Recognition
Voice recognition becomes available
once the system has been
initialised. This begins when the
ignition is turned on. Initialisation
may take a few moments.
1. Press
g on the steering wheel
control to activate voice
recognition, or touch
g on the
infotainment touchscreen on
the instrument panel.
2. The audio system mutes and
the system plays a prompt
followed by a beep.
3. Wait until after the beep
completes, then clearly speak
one of the commands
described in this section.
Press
g to interrupt any voice
recognition system prompt. For
example, if the prompt seems
to be taking too long to finish,
press
g again and the beep
should happen right away.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
