Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
114
The screen returns back to the
screen where voice recognition was
initiated.
The Back Command
Say “Back” or press the BACK
button to go to the previous screen.
If in voice recognition, and “Back” is
stated all the way through to the
initial screen, then “Back” is stated
one more time, the voice recognition
session will cancel.
Help
Say “Help” on any voice recognition
screen and the help prompt for the
screen is played. Additionally, a
pop-up displays a text version of the
help prompt. Depending on how
voice recognition was initiated, the
Help pop-up will either display on
the instrument cluster or the
infotainment touchscreen. Touch the
Dismiss button to make the pop-up
go away.
Pressing
g while the help prompt is
playing will terminate the prompt
and a beep will be heard. Doing this
will stop the help prompt so that a
voice command can be used.
Voice Recognition for the
Radio
Some audio screens have a voice
recognition button (
g) to launch
audio voice recognition. If the voice
button is touched in a radio screen,
the voice commands for radio and
media features are available.
“Switch to AM” : Switch bands to
AM and tune to the last AM radio
station.
“Switch to FM” : Switch bands to
FM and tune to the last FM radio
station.
“Tune to <AM frequency> AM” :
Tune to the radio station whose
frequency is identified in the
command (like “nine fifty”).
“Tune to <FM frequency> FM” :
Tune to the radio station whose
frequency is identified in the
command (like “one o one
point one”).
Voice Recognition for Audio
My Media
If browsing My Media when the
voice button is selected, the voice
recognition commands for My Media
features are available.
“Go to Artist” : Begin a dialog to
enter a specific artist name.
“Go to Artist <artist name>” :
Begin playback of the media
selection identified in the command.
“Go to Album” : Begin a dialog to
enter a specific album name.
“Go to Album <album name>” :
Begin playback of the identified
album name in the command.
“Go to Song” : Begin a dialog to
enter a specific song name.
“Go to Song <song name>” :
Begin playback of the identified
song name in the command.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
