Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
117
“Pair Phone” : Begin the Bluetooth
pairing process. Follow instructions
on the radio display.
“Switch Phone” : Select a different
phone for outgoing calls.
“Voice Keypad” : Begins a
dialogue to enter special numbers
like international numbers. The
numbers can be entered in groups
of digits with each group of digits
being repeated back by the system.
If the group of digits is not correct,
the command “Delete” will remove
the last group of digits and allow
them to be re-entered. Once the
entire number has been entered, the
command “Call” will start dialling the
number.
“Voice Mail” : Initiate a call to voice
mail numbers.
Voice Pass-Thru
Voice pass-thru allows access to the
voice recognition commands on the
mobile phone, for example, Siri or
Voice Command. See the mobile
phone manufacturer's user guide to
see if the mobile phone supports
this feature. To activate the phone
voice recognition system, press and
hold
g on the steering wheel for a
few seconds.
Phone
Bluetooth
The Bluetooth-capable system can
interact with many mobile phones,
allowing:
.
Placement and receipt of calls in
a hands-free mode.
.
Sharing of the mobile phone's
address book or contact list with
the vehicle.
To minimise driver distraction,
before driving, and with the vehicle
parked:
.
Become familiar with the
features of the mobile phone.
Organise the phone book and
contact lists clearly and delete
duplicate or rarely used entries.
If possible, program speed dial
or other shortcuts.
.
Review the controls and
operation of the infotainment
system.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
