Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
124
USB cable. Aftermarket or
third-party cables may
not work.
The PROJECTION icon on the
Home Page will change to Android
Auto or Apple CarPlay depending
on the phone. Android Auto and/or
Apple CarPlay may automatically
launch upon USB connection. If not,
press the Android Auto and/or Apple
Carplay icon on the Home Page to
launch.
For further information about
Android Auto and Apple CarPlay in
the vehicle, seek the assistance of
your dealer.
Android Auto is provided by Google
and is subject to Google’s terms
and privacy policy. CarPlay is
provided by Apple and is subject to
Apple’s terms and privacy policy.
For Android Auto support see
https://support.google.com/
androidauto or Apple CarPlay
support at https://www.apple.com/br/
ios/carplay/. Apple or Google may
change or suspend availability at
any time.
If Android Auto device is connected
while another device was paired,
the switch devices pop up message
will appear as follows:
“Connecting Android Auto, will
disconnect Bluetooth
Device (Name)."
Note
For using Android Auto function, the
date of Infotainment System should
be the same as the Android Auto
device.
Note
For your safety, some applications
are disabled while your vehicle is in
motion.
Note
To end Android Auto, disconnect the
phone from the USB port or change
the USB setting on the phone .
In some cases, it might be
necessary to unpair the phone from
the radio before plugging the USB
cable to start the Android Auto.
Using Voice Recognition
Using Bluetooth Voice
Recognition
To use voice recognition, press the
g button on the steering wheel. Use
the commands below for the various
voice features. For additional
information, say “Help” while in a
voice recognition menu. See Voice
Recognition 0 111 for help using
voice recognition commands.
Making a Call
Calls can be made using the
following commands.
Using the “Dial” or “Call”
Command
To call a number:
1. Press
g. The system responds
“Command Please,” followed
by a tone.
2. Say “Dial” or “Call” followed by
the complete phone number.
Use the “Voice Keypad” command
for international numbers or special
numbers which include * or #.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
