Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
125
Once connected, the person called
will be heard through the audio
speakers.
To call using a contact from your
phone book:
1. Press
g. The system responds
“Command Please,” followed
by a tone.
2. Say “Dial” or “Call” and then
say the contact name. For
example “Call John at Work.”
Once connected, the person called
will be heard through the audio
speakers.
Using the “Switch Phone”
Command
1. Press
g. The system responds
“Command Please,” followed
by a tone.
2. After the tone, say “Switch
Phone.” The system displays a
list of phones to select.
Using the “Voice Keypad”
Command
1. Press
g. The system responds
“Command Please,” followed
by a tone.
2. After the tone, say “Voice
Keypad.” The system allows
entry of special numbers and
characters.
Using the “Voice Mail” Command
1. Press
g. The system responds
“Command Please,” followed
by a tone.
2. After the tone, say “Voice Mail.”
The system dials the voice mail
number of the connected
phone.
Clearing the System
Unless information is deleted out of
the vehicle Bluetooth system, it will
be retained. This includes phone
pairing information. For directions
on how to delete this information,
see “Deleting a Paired Phone.”
Settings
Various settings for the infotainment
system and vehicle can be changed
via the Settings menu.
Some settings for different drivers
can be memorised individually for
each vehicle key.
Press
{ and select SETTINGS on
the home screen.
Note
Depending on vehicle model and
options, some of the functions
described below may not be
available.
Time and Date
Touch SET TIME to edit the time
and then touch
y or z to increase
or decrease hours, minutes, and AM
or PM. Press 12Hr or 24Hr for 12 or
24 hour clock.
Touch SET DATE to edit the date
and then press
y or z to increase
or decrease month, day, or year.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
