Holden Colorado Owner Manual (Holden-Localizing-Australia/New Zealand-
13711071) - 2020 - CRC - 3/4/19
218 Vehicle Care
Bonnet
Opening
1. Pull the release lever
rearwards and upwards.
Note
Do not step on the front Nudge Bar
(if equipped) to access the engine
compartment
2. Push the safety catch towards
the driver’s side and open the
bonnet.
3. Remove the support rod from
the holder and secure in the
bonnet aperture.
Closing
{
Warning
To avoid injury and/or damage to
the vehicle, check each time,
before the bonnet is closed, that
the contact area is unobstructed.
Before closing the bonnet, be sure
that all the filler caps are closed
securely.
To Next Page
Loading...
