Chapter 8
SPECIFICATIONS
SPECIFICATIONS – DIESEL ENGINES
Engine Type Diesel 4JJ1-TCX HI
Description 4 cylinder, intercooled turbo charged, electronic direct injection
Piston displacement 2,999 cc
Engine power and torque
Refer to
holden.com.au
Oil specication
Use API CG grade (minimum) or ACEA B2/B3
15W-40 viscosity.
For prolonged use in snow areas use 10W-30.
Oil capacity inc lter
7.0 litres (2WD)
7.5 litres (4WD)
Coolant capacity
9.3 litres (man)
9.2 litres (auto)
Coolant specication
50% water and 50% coolant, conforming to
Holden’s specication No. HN2217.
Brake and clutch uid Hydraulic brake uid SAE J1704 – DOT4 grade.
Power steering uid DEXRON
®
- III automatic transmission uid.
Fuel tank capacity 76 litres
Battery
Maintenance free 12 V.
622 cold cranking amps (CCA),
80 amp hours.
Remote control battery CR2016