IMPORTANT INFORMATION
SECURITY CODE
To enter the security code
• An identication card stamped with the security code number is provided with the
vehicle.
• Keep the card in a safe place, not in the vehicle.
• The audio security system activates immediately whenever the battery is
disconnected.
• After battery disconnection, the audio system must be unlocked with the security
code before it can operated.
1. Turn the vehicle’s ignition key to ACC or ON position.
• The display will ash “AM 12:00”.
2. Press the POWER/VOLUME button
to turn on the audio system.
• “CODE” will ash on the display.
3. Enter the security code into the audio system using the number (1 to 6) buttons
.
• When the complete four-digit security code is entered, the complete security
code will ash three times. The audio system will be fully functional and the
radio will begin to operate.
Note If entering the security code failed, “ERR” will be displayed for a few seconds.
“CODE” will then be displayed again. Repeat the previous procedure to enter the
security code again.
Chapter 1B
AUDIO
1B-4