EasyManua.ls Logo

HOLDEN RC COLORADO 2010 - Ignition switch

HOLDEN RC COLORADO 2010
202 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2
LOCKS
2-5
IGNITION SWITCH
IGNITION POSITIONS
WARNING
Do not turn the engine off while the vehicle
is moving. Power assisted equipment
(such as brakes or steering) which are
operated by the engine will be ineffective.
Never remove the key while the vehicle is
moving, as this will lock the steering.
Off
This is the normal parking position for the ignition switch; the accessories and engine
are off. The ignition key can only be removed from the ignition switch when it is in this
position. When the key is removed the ignition and steering are locked. To release the
steering lock, insert the key into the switch and turn the key to any other position. If
you have trouble turning the ignition key to unlock the steering, turn the steering wheel
slightly to the right or left while turning the key.
Note The ignition switch cannot be turned to OFF and the key cannot be removed
when the shift lever is out of the P (park) position (automatic transmission only).
Accessories
When the ignition key is in the ACC position, the engine is off, but accessories such
as the radio will still operate. To avoid attening the battery, avoid excessive use of
accessories when the engine is not running.
On
When the key is in the ON position, the engine is ready to start and all electrical
systems are active. Do not leave the ignition switch in this position for a prolonged
period unless the engine is running, otherwise the battery will discharge.
Start
Turn the key to the START position for starting the engine. The ignition key should be
released from this position as soon as the engine starts.

Related product manuals