Chapter 3
KNOW YOUR VEHICLE
3-11
To attach top tether strap of child restraint:
1. Fold the rear seat forward. To do this,
pull on the strap located on the top of
the centre rear seat.
2. Lift the head restraint at the position
where the child restraint will be tted.
3. Thread the top tether strap of the child
restraint under the head restraint and
between the poles.
4. Attach the top tether strap clip to the
anchorage point.
Note The child restraint attaching clip
ts directly on to the body sheet metal
as illustrated.
5. Fold the rear seat to its upright
position, ensure the rear seatbelt and
top tether strap are free.
Note Ensure that the rear seat is
latched correctly.
6. Continue tting the child restraint as
per the child restraint manufacturer’s
instructions
Note If unsure about installing a child
restraint attaching clip, please contact
an approved restraint tting station or
your Holden Dealer.
RESTRAINTS cont.
to
Child Restraint
Tether hook
Front of vehicle
Back panel
To Next Page
Loading...
