HOLDEN Trailblazer RG MY18 - Introduction

Holden Trailblazer Owner Manual (GMSA-Localising-Australia-11475197) -
2018 - crc - 3/15/17
98 Lighting
Lighting Features
Entry Lighting
Entry lighting provides additional
security when returning to the
vehicle at night.
Press
" on the key. Interior and
exterior* lights illuminate for a
short time.
*: with light control switch in Auto.
The lighting switches off when the
ignition is turned to the ACC
position.
Additionally, some interior lights and
switches will illuminate when the
driver's door is opened.
See Ignition Positions 0 191.
Exit Lighting
The interior lamps will come on
when the key is removed from the
ignition. The lamps will not come on
if the sliding button of the courtesy
light is in the OFF position.
Headlights illuminate the way for an
adjustable time after leaving the
vehicle. The exit lighting in the
standard setting is activated
30 seconds after the driver's door is
closed.
The activation time can be changed,
refer to Settings in the Infotainment
System.
To operate:
1. Switch off ignition.
2. Turn the light control switch
to Auto.
3. Remove ignition key.
4. Open driver's door.
5. Close driver's door.
Battery Power Protection
Switching Off Electric Lights
To prevent discharge of the battery
when the ignition is switched off,
some interior lights are switched off
automatically after some time.
If you turn off the ignition with the
exterior lights on, they will
immediately turn off. If you turn the
exterior lights on when the ignition is
off they will remain on.