Holden Trailblazer Owner Manual (GMSA-Localising-Australia-11475197) -
2018 - crc - 3/15/17
Infotainment System 141
Note
To end Android Auto, disconnect the
phone from the USB port or change
the USB setting on the phone .
In some cases, it might be
necessary to unpair the phone from
the radio before plugging the USB
cable to start the Android Auto.
Settings
Note
Depending on vehicle version and
market, some of the functions
described below might not be
available.
The Settings menu allows
adjustment of different vehicle and
radio features. The menu may
contain the following:
Time and Date
Touch SET TIME to edit the time
and then touch
y or z to increase
or decrease hours, minutes, and AM
or PM. Press 12Hr or 24Hr for 12 or
24 hour clock.
Touch SET DATE to edit the date
and then press
y or z to increase
or decrease month, day, or year.
Touch CLOCK DISPLAY to choose
ON or OFF to show the time in the
screen.
Language
This will set the display language in
the radio, instrument panel, and
voice recognition. Press Language
and select the appropriate
language. Press
[ to go back to the
previous menu.
Valet Mode (If Equipped)
This will lock the infotainment
system and steering wheel controls.
It may also limit top speed, power,
and access to vehicle storage
locations (if equipped).
To enable valet mode:
1. Enter a four-digit code on the
keypad.
2. Touch Enter to go to the
confirmation screen.
3. Re-enter the four-digit code.
Touch LOCK or UNLOCK to lock or
unlock the system. Touch
[ to go
back to the previous menu.
To Next Page
Loading...
