Holden Trailblazer Owner Manual (GMSA-Localising-Australia-11475197) -
2018 - crc - 3/15/17
238 Vehicle Care
Checking Brake Fluid Level
The level should be between the
MIN and MAX marks.
If the fluid level is correct, do not
remove the reservoir cap, as brake
fluid exposed to the atmosphere will
quickly absorb moisture.
Adding Brake Fluid
See Recommended Fluids and
Lubricants 0 274.
1. Turn the ignition off.
2. Wipe the sides of the cap
clean.
3. Rotate the brake fluid reservoir
cap anticlockwise and remove.
4. Top up with the recommended
brake fluid.
{
Warning
Using brake fluid other than GM
recommended brake fluid may
cause corrosion to components of
the braking system and reduced
braking performance.
Use only new brake fluid. Use of
old, used or inferior brake fluid
may endanger the functioning of
the brake system.
5. Secure the cap by rotating
clockwise and clean up any
spilt fluid.
If the brake fluid requires regular
topping up, contact a Holden Dealer
immediately.
Caution
Do not dispose of used brake
fluid with household waste.
Use the local, authorised waste
management facility.
Battery
{
Warning
Batteries emit an explosive gas
mixture which may be ignited.
Therefore, you should keep
sparks and flames away from the
battery at all times. Never smoke
near a battery.
Batteries contain sulphuric acid.
If acid contacts skin or clothing,
flush immediately with plenty of
water. In case of eye contact,
flush with plenty of water and
contact a doctor immediately.
Battery acid also damages paint
and fabrics. To minimise damage,
wash off immediately.
(Continued)
To Next Page
Loading...
