202 Climate control
Controls
A. Display bar
B. Rear window demister
C. Temperature control: left side
D. Windscreen demister
E. Mode up
F. Temperature control: right side
G. Air conditioning
H. Off
I. Auto
J. Mode down
K. Fan speed
L. Recirculation
M. Zone
N. Exterior air temperature
Temperature controls
• Rotate controls (C) and
(F) clockwise (warmer) or
anticlockwise (cooler).
• The settings for each side
appear on the display bar (A).
• Turning the control past 30°C,
will show H (hottest).
Turning the control past 17°C,
will show C (coolest).
• Between 22°C and 24°C is
recommended.
Single and dual zone
• Press ZONE (M) to select
Single-Zone (SZ) mode or
Dual-Zone (DZ) mode.
• SZ or DZ appear on the display.
Single-Zone (SZ) mode
All zones are set to the same
temperature.
The temperature is shown on the
display.
Adjust using the control (F).
Dual-Zone (DZ) mode
Dual-Zone mode allows different
temperatures to be set for the left
and right sides or to link them.
Adjust the passenger side by
rotating control (C).
When linked, the passenger side
temperature setting mirrors the
driver side temperature setting.
To link, press and hold AUTO (I)
for at least 3 seconds.
Note
Linking automatically occurs if the
passenger and driver sides are set
to the same temperature when the
ignition is turned on.
MY11_VE_DOM_BOOK.indb 202MY11_VE_DOM_BOOK.indb 202 17/12/2010 9:31:18 AM17/12/2010 9:31:18 AM
To Next Page
Loading...
