EasyManua.ls Logo

HOLDEN VE II Series 2011 - Electrical System

HOLDEN VE II Series 2011
341 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
286 Vehicle care
Electrical system
Warning
Turn off the ignition (LOCK
position) and any electrical
equipment before changing
a fuse.
B
B
A
A
A. Fuse puller
B. Fuse
A fuse puller is provided in the
cabin and engine compartment fuse
panels, which can be used on each
of the three fuse panels.
Spare fuses of various ratings are
provided in the cabin and engine
compartment fuse/relay boxes.
Replace blown fuses promptly.
Always replace a blown fuse with
one of the same amperage.
The amperage is shown on the
fuse’s head:
Colour Rating (amps)
Grey 2
Brown 7.5
Red 10
Blue 15
Yellow 20
Natural 25
Green 30
Replace the fuse cover securely
after use.
Warning
When replacing a fuse be sure
to use a fuse of the speci ed
amperage.
Never install a wire or similar
as it could damage electrical
components and cause a re.
Any improper alterations to the
electrical system may cause a
re hazard and engine damage.
To maintain your own safety and
that of the vehicle, have any work
involving the electrical system or
the replacement of high current
fuses or relays carried out by a
Holden Dealer.
MY11_VE_DOM_BOOK.indb 286MY11_VE_DOM_BOOK.indb 286 17/12/2010 9:31:34 AM17/12/2010 9:31:34 AM

Related product manuals