Technical data 321
Compliance label
This label shows the vehicle make,
model series, date of manufacture,
Vehicle Identifi cation Number (VIN),
approved seating capacity and
approval number.
Cooling system/
air conditioning label
Label (A) shows the warnings for
the air conditioning and cooling
system as well as information on
the air conditioning refrigerant and
compressor oil.
LPG compliance plate
The vehicle may have an LPG
compliance plate.
The plate (B) shows the installation
date, plate number, permit number,
certifi cate of compliance number,
cylinder (LPG tank) number, Vehicle
Identifi cation Number (VIN) and
engine number.
Body and option plate
Plate (C) shows the model
identifi cation, Vehicle Identifi cation
Number (VIN), paint and trim colour
combination, air conditioning, paint
number, engine, transmission, axle
ratio options, suspension options
(where applicable) and build date.
(SIDI) direct injection V6 engine
BA C
MY11_VE_DOM_BOOK.indb 321MY11_VE_DOM_BOOK.indb 321 17/12/2010 9:31:40 AM17/12/2010 9:31:40 AM
To Next Page
Loading...
