Storage 61
2. Ensure the long straps are folded
back and tied away securely.
3. If the vehicle has a cargo
blind, remove. See Cargo blind
(Sportwagon) on page 64 .
4. Tilt the top of the cargo barrier
backward and lift into place.
5. Place the cargo barrier directly
behind the rear seats.
A
A
BB
6. Align the top attachment straps
with the roof attaching holes (A).
7. Flip open the upper attaching
hole covers.
8. Insert the hand operated bolts
into the holes (A) and turn
clockwise.
Do not tighten fully until all four
bolts are fi tted.
9. Align the short bottom straps
so the strap holes align with the
mounting nuts (B) in the fl oor.
10. Insert the bolts into the holes (B)
and turn clockwise.
11. Firmly tighten all four bolts and
check the tension.
12. Refi t the cargo blind.
To move or remove the cargo barrier,
reverse the above procedure.
Behind front seats position
Warning
It is recommended to correctly
anchor the load in the rear cargo
area, even if the cargo barrier is
in position.
1. Before placing the cargo
barrier into the vehicle, rotate so
the four attachment straps point
rearward.
2. Ensure the short straps are
folded back and tied away
securely.
3. If the vehicle has a cargo
blind, remove. See Cargo blind
(Sportwagon) on page 64 .
4. Fold the rear seat down. See
Rear seats on page 39 .
5. Tilt the top of the cargo barrier
backward and lift into place.
MY11_VE_DOM_BOOK.indb 61MY11_VE_DOM_BOOK.indb 61 17/12/2010 9:30:50 AM17/12/2010 9:30:50 AM
To Next Page
Loading...
