72 Instruments and controls
Intermittent wipers
Rotate collar down for more frequent
wipes, up for less frequent wipes.
Note
The intermittent wiper frequency
is increased as vehicle speed
increases.
Auto ( rain sensing)
The vehicle may have rain sensing
windscreen wipers.
Caution
Switch off the rain sensor by
setting the lever to the 0 position
before entering a car wash.
Replace the wiper blades as
soon as they do not completely
remove water from the
windscreen. If the blades are
not replaced, the wipers may
continue to wipe even though
most of the screen is dry.
To prevent damage to the wiper
blades, make sure that the
windscreen is fully defrosted
before switching on the rain
sensor.
AUTO The wipers cycle when
water is detected on the
windscreen.
The wiper speed and frequency are
adjusted automatically.
To manually adjust the sensitivity of
the rain sensing:
• Rotate the collar down for higher
sensitivity.
• Rotate the collar up for less
sensitivity.
MY11_VE_DOM_BOOK.indb 72MY11_VE_DOM_BOOK.indb 72 17/12/2010 9:30:52 AM17/12/2010 9:30:52 AM
To Next Page
Loading...
