Black plate (8,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
7-8 Infotainment System
7. Touc h Back to exit.
Note: The settings will be applied
to the currently selected audio
source.
Adjusting the balance
Adjust the sound between the left
and right speakers.
1. Press CONFIG (A).
2. Touch the Audio tab.
3. Touc h Balance.
Balance: Touch ◄ or ► to
adjust the sound balance
between the left and right
speakers.
4. Touc h Back to exit.
Setting the equaliser
The equaliser enables the user to
control the sound of the audio
system.
With Custom selected, you can
adjust the bass/midrange/
treble tone.
1. Press CONFIG (A).
2. Touch the Audio tab.
3. Touc h Equaliser.
4. Touch the option required.
The option selected is indicated
by
V.
5. Touc h Back to exit.
Setting the Speed Dependent
Volume Control (SDVC)
The audio system volume adjusts
depending on the vehicle’s speed.
As the vehicle’s speed increases,
the volume of the audio system also
increases to compensate for the
driving noise.
1. Press CONFIG (A).
2. Touch the Audio tab.
3. Touc h Speed dependent
volume control.
4. Touch the option required.
1: Small volume increase
2: Larger volume increase
The option selected is indicated
by
V.
5. Touc h Back to exit.
Setting the Dynamic Distortion
Limiter (DDL)
DDL limits the amount of amplifier
distortion.
When the limit is reached the
volume will not be able to be
increased.
1. Press CONFIG (A).
2. Touch the Audio tab.
3. Touc h Dynamic distortion
limiter.
To Next Page
Loading...
