EasyManua.ls Logo

HOLDEN VE UTE II 2012 Series - Parking; Retained Accessory Power (RAP)

HOLDEN VE UTE II 2012 Series
296 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (5,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Driving and Operating 9-5
Note:
.
Manual transmission: The clutch
must be pushed to the floor
while turning the key, otherwise
the vehicle cannot be start ed.
.
Do not depress the accelerator
pedal while starting the engine.
.
Do not subject the engine to
full-throttle acceleration or high
speeds until it has reached
normal operating temperature.
Premature engine wear or
damage may result.
Retained Accessory
Power (RAP)
The power windows will operate
when the key is in the ON or
ACCESSORIES position.
Once the ignition is turned to the
LOCK position, the RAP allows the
power windows to continue to
operate for up to 10 minutes. If a
door is opened during this time, they
will be deactivated.
Note: The audio system w ill be
deactivated only if the drivers door
is opened.
Parking
1. Apply the parking brake.
2. Automatic transmission: Select
position P.
Manual transmission: If facing
uphill or on flat ground, select
1st gear. If facing downhill,
select reverse gear.
3. Shut the windows.
4. Switch off the ignition and
remove the key.
5. Press the
Q button on the key to
lock both doors and arm the
alarm system. See Vehicle
Alarm System on page 29.
Note: The engine fan may keep
running for several minutes after the
ignition has been switched off. This
is normal.
{
WARNING
Be careful where you park or
drive. As with any vehicle, do not
park or operate the vehicle in
areas where combustible
materialssuchasdrygrassor
leaves can come in contact w ith a
hot exhaust system.
Exhaust gases are hazardous,
especially if they build up in
closed spaces.
Never leave the engine running in
an enclosed space such as a
closed garage or underground
car park.

Table of Contents

Related product manuals