EasyManua.ls Logo

HOLDEN VE UTE II 2012 Series - Battery

HOLDEN VE UTE II 2012 Series
296 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (17,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Vehicle Care 10-17
Checking the clutch/brake fluid
level
Check the clutch/brake fluid
reservoir weekly.
The level should be between the
MIN and MAX marks.
If the fluid level is correct, do not
remove the reservoir cap, as brake
fluid exposed to the atmosphere will
quickly absorb moisture.
Adding clutch/brake fluid
Use heavy duty brake fluid. See
Recommended Fluids and
Lubricants on page 112.
1. Switch off the ignition.
2. Wipe the sides of the cap clean.
3. Rotate anticlockwise to remove.
4. Top up with heavy duty brake
fluid.
{
WARNING
Use only new brake fluid. Use of
old, used or inferior brake fluid
may endanger the functioning of
the brake system.
5. Secure the cap and clean up
any spilt fluid.
If the clutch/brake fluid requires
regular topping up, contact a Holden
Dealer immediately.
Battery
{
WARNING
Batteries emit an explosive gas
mixture which may ignite.
Therefore you should keep sparks
and flames away from the battery
at all times. Never smoke near a
battery.
Batteries contain sulphuric acid.
If acid contacts skin or clothing,
flush immediately with plenty of
water. In case of eye contact,
flush with plenty of water and
con tact a doctor immediately.
Battery acid also damages paint
and fabrics. To minimise damage,
wash off immediately.
Take care with all metal objects
and tools including items you may
wear (for example jewellery, r ings
and metal watch bands) near
battery terminals.

Table of Contents

Related product manuals