Black plate (19,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Vehicle Care 10-19
Bulb Replacement
Contact a trained service technician
if unsure about the bulb
replacement process.
When replacing bulbs:
.
Switch off the ignition and
remove the key.
.
Turn off related switches.
.
Fit bulbs of the specified
wattage only.
.
Do not touch bulbs or reflectors
with bare hands.
.
Clean stained bulbs with
methylated spirits.
Bulbs to be changed by a Holden
Dealer
.
Fog lights
.
Instrument panel lights
.
Rear high level stop light
.
Interior dome lights
.
Load area light
{
CAUTION
Condensation may temporarily
appear on the inside of exterior
light lenses after rain or after
washing the vehicle.
Condensation occurs when there
is a temperature difference
between the inside and outside of
the light, allowing a fine mist to
form on the inside surface of the
lens. This condensation will
disappear when the vehicle is in a
dry environment or the light is on.
If water does collect inside the
light, contact a Holden Dealer.
Front lights
B
A
A. Front of vehicle
To Next Page
Loading...
