Black plate (25,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Vehicle Care 10-25
Side Marker Lights
(W5W bulb)
1. Grasp the lens at the rear, push
forwards, and pull away from the
body of the vehicle.
2. Separate the bulb holder from
the lens assembly by rotating
the bulb holder anticlockwise.
3. Remove the bulb by pulling it
straight out of the holder.
4. Insert the new bulb into t he bulb
holder.
5. Install the bulb holder into the
lens housing.
The bulb holder only fits i nto the
lens housing one way. Keep
rotating the bulb holder
clockwise until it fits into place
and can be tightened.
6. When inserting the lamp, first
insert the re ar of the housing
into the body panel before
pushing the front inwards.
7. Check light operation.
Tail lights
Tail light assembly
A
C
B
B
D
A
C
To Next Page
Loading...
