Black plate (26,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
10-26 Vehicle Care
Driver side shown
A. Reverse light (P21W bulb)
B. Stop/tail light (P21/5W bulb)
C. Turn signal light (PY21W
amber bulb)
D. Rear light wiring connector
Tail light access
F
E
To gain access to the rear turn
signal light, stop/tail light and
reverse light bulbs:
1. Remove the six scrivets and the
access panel (F).
Use a flat-blade screwdriver to
prise outwards under the head
of the centre pin of the scrivet.
2. Undo the three light assembly
securing nuts (E).
3. Carefully remove the light
assembly from the vehicle.
To Next Page
Loading...
