Black plate (28,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
10-28 Vehicle Care
Number Plate Light
(W5W bulb)
1. Push the locking tang at the end
of the lamp housing towards the
lens and pull the li ght assembly
downwards.
2. Remove the bulb holder from the
light housing by rotating the bulb
holder anticlockwise.
3. Pull the bulb out of the bulb
holder.
4. Push the new bulb into the bulb
holder.
5. Install the bulb holder into the
light housing by rotating the bulb
holder clockwise, ensuring that
the seal is undamaged.
6. Engage the fixed tang into the
number plate surround, then
push the light upwards to
engage the locking tang.
7. Check light operation.
Interior Lights
Cabin storage light
(Festoon bulb, 5W)
The vehicle may have cabin storage
lights.
To Next Page
Loading...
