Black plate (29,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Vehicle Care 10-29
1. Gently prise away the lens
housing with a fine flat-blade
screwdriver.
2. Pull the tab holding the bulb
(opposite end to wirin g)
backwards and pull the bulb out.
3. To install the new bulb, pull the
tab backwards.
4. When the new bulb is in place,
feed the wiring back into the
cavity and push the lens housing
back into place.
Glove box light
(Festoon bulb, 5W)
1. Remove the lens housing with a
fine flat-blade screwdriver.
2. Pull the tab holding the bulb
(opposite end to wirin g)
backwards and pull the bulb out.
3. To install a new bulb, pull the tab
backwards.
4. When the new bulb is in place,
feed the wiring back into the
cavity and push the lens housing
back into place.
Electrical System
Fuses
{
WARNING
Switch off the ignition (LOCK
position) and any electrical
equipment before changing
afuse.
B
B
A
A
A. Fuse puller
B. Fuse
To Next Page
Loading...
