Black plate (4,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
2-4 Keys, Doors, and Windows
.
If pressing the key buttons does
not work, the doors can be
locked and unlock ed by turning
the key in the driver ’s door lock:
‐ Turn the key towards the rear
of the vehicle (once) to lock
the doors.
‐ Turn the key towards the front
of the vehicle once to unlock
the driver ’s door, twice to
unlock both doors.Opening the
door will cause activation of
the alarm after a preset period
of time. If this occurs, insert
the key into the ignition and
turn on.
.
If the vehicle has a hard t onneau
cover, the key locks and unlocks
the cover and the doors.
.
If the vehicle is delivered with
only one key, or the key shows
signs of damage, contact your
Holden Dealer as soon as
possible.
INFOCARD
The security card lists various
security numbers for the vehicle,
including key numbers.
Keep the card in a safe place, away
from the vehicle.
If a key is lost, a replacement c an
be ordered through any Holden
Dealer by quoting the key code
number and the security code
number and providing proof of
ownership.
Door Locks
Locking and unlocking
To customise f eatures, see Vehicle
Personalisation on page 5‑31.
When locking the vehicle:
.
An open door will remain
unlocked.
.
The horn will chirp five times.
.
If the driver’s door is open when
the
Q button is pressed, both
doors will be locked and the
driver ’s door lock and snib will
be unlocked immediately.
Press
Q once to:
.
Lock both doors.
.
The vehicle may have a hard
tonneau cover.
Lock the hard tonneau cover.
.
Arm the alarm (after a short
delay).
To Next Page
Loading...
