Black plate (14,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
5-14 Instruments and Controls
Stability control fault animation
If g and d illuminate and the
Stability Ctrl Faul t animation is
displayed:
.
There is a problem with
the ESC.
.
ESC is no longer operating.
.
Press TRIP or the ENTER
button to clear the animation.
.
g and d remain illuminated until
the problem is repaired.
.
Contact a Holden Dealer.
See Electronic Stability Control
(ESC) on page 9‑ 14.
High-Beam On Light
The 3 i ndicator light illuminates
when headlight high beam is on.
Front Fog Light Indicator
Light
The # indicator light illuminates
when the fog lights are on.
Turn Signal Light
Push the lever to signal a turn:
.
Push the lever in the same
direction the steering wheel is
turned.
.
A turn signal indicator light G
will flash.
.
The turn signal will self-cancel
after larger turns.
Note: In some turns (such as
changing lanes) the steering wheel
is not turned far enough to cancel
the turn signal. Push it back to its
original position.
.
Push part way to signal a lane
change. The turn signals will
flash three times.
.
Push the lever in either direction
to cancel a lane change signal.
See Turn and Lane-Change
Signals on page 6‑ 3.
Door Open Light
The ? warning light illuminates
when a door is not completely
closed.
Anti-theft Alarm System
The A indicator light flashes when
the security system is activated.
See Vehicle Alarm System on
page 2‑9.