HOLDEN VE UTE II 2012 Series - Head Restraint Adjustment

Black plate (3,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
In Brief 1-3
E. Lumbar
F. Seatback tilt
See Seat Position on page 3‑ 2.
Head Restraint
Adjustment
{
WARNING
The head restraint is a safety
feature. Do not use the head
restraint as a headrest.
The centre of the head restraint
should be at eye level, never at
neck level.
Lift the head restraint up to raise it.
Push the locking button and push
the head restraint down to lower it.
The head restraints cannot be
removed.
Seatbelts
Pull the metal tongue across your
body and insert into the buckle until
it clicks into place.
The belt should not be twisted.
It should lie flat and fit firmly across
your hips.
To remove, press the release button
on the buckle to allow the belt to
retract.