HOLDEN VE UTE II 2012 Series - Page 91

Black plate (27,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Instruments and Controls 5-27
Note:
.
Val ues are highlighted for a
short period. Press TRIP to
re-highlight a value.
.
If the wrong buttons are
accidentally pressed, causing
the display to show anything
other than normal, turn the
ignition off then on again (only
when the vehicle is stationary).
.
The display settings are
remembered when the ignit ion is
turned off and recalled next time
the ignition is turned on.
The vehicle may have personal
identity keys.
The display settings are
remembered for each key and
recalled next time the ignition is
turned on with that key. See
“Personal identity keys” under Keys
on page 2‑1.
Displays
km/h
rpm/000
Odometer/trip
Displays total vehicle kilometres.
Reset trip meter:
.
Press the ENTER button for
3 seconds to reset.
.
Press the ENTER button briefly
to reset trip, average speed and
average fuel values.
Distance/time to go
Displays distance and time to
arrival:
.
Rotate ▲ or ▼ to enter
estimated trip distance.