HOLDEN VE UTE II 2012 Series - Page 92

Black plate (28,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
5-28 Instruments and Controls
.
The default value is 500 km.
This default can be adjusted.
.
Can be enabled or disabled. See
Vehicle Personalisation on
page 5‑31.
Range
Displays an estimate of how far the
vehicle wi ll g o on the current
amount of fuel, based on the fuel
usage over approximately the
previous quarter of the tank.
Note: The range is an estimate only
and may vary with driving style and
variation in the fuel gauge reading.
Instantaneous fuel
The vehicle may have an
instantaneous fuel display.
Displays instantaneous fuel
consumption.
.
Litres per 100 km is displayed
when vehicle speed is above
10 km/h.
.
Litres per hour is displayed
when vehicle speed is below
10 km/h.
The vehicle may have Acti ve Fuel
Management (AFM).
.
Displays the number of currently
active cylinders.
.
The AFM display may be
enabled or disabled. See Vehicle
Personalisation on page 5‑31.
Average speed/average fuel
Displays average speed and fuel
consumption.
.
It is calculated from the last time
the trip computer was reset.