HOLDEN VE UTE II 2012 Series - Lighting

Black plate (1,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Lighting 6-1
Lighting
Exterior Lighting
ExteriorLightControls........6-1
Headlight High/Low-Beam
Changer . . . . . . . . . . . . . . . . . . . . . 6-2
Automatic Headlight
System ...................... 6-2
Hazard Warning Flashers . . . . . 6-3
Turn and Lane-Change
Signals . . . . . . ................ 6-3
Fog Lights .................... 6-4
Interior Lighting
Instrument Panel Illumination
Control ......................6-4
Dome Lights .................. 6-5
Reading Lights . . . ............. 6-5
Glove Box Lights .............. 6-5
Lighting Features
Entry Lighting ................. 6-6
Exit Lighting ................... 6-6
Battery Power Protection . . . . . . 6-6
Exterior Lighting
Exterior Light Controls
O (Off): Turns the headlights and
parking lights off. The switch returns
to AUTO.
AUTO (Automatic headlights):
Headlights and parking lights switch
on and off automatically. Select high
and low beam using the lever.
Note: When wipers are operating,
headlights and parking lights switch
on automatically after six wipes.
; (Parking lights): Turns on the
parking lights, tail lights, rear
number plate lights, and instrument
panel lighting.
2 (Headlights): Turns on the
headlights and all parking li ghts.
# (Fog lights): Thevehiclemay
have fog lights.
When the light control i s set to
parking lights or headlights, pull the
switch out to turn the fog lights on.
Pushtheswitchintoturnthemoff.
The
# indicator lights up on the
instrument panel when the fog lights
are on.
Note: The fog light switch can also
be pulled out with the s witch in the
AUTO position.
If left in this position, whenever the
parking lights and headlights t urn on
automatically, so will the fog lights.