HOLDEN VF UTE 2015 - Auxiliary Devices; Bluetooth Audio

Black plate (37,1)
Holden VF Ute Owner Manual (Holden-Localizing-Holden-8660899) - 2015 -
crc - 8/5/14
Infotainment System 7-37
3. Touch Return to Factory
Settings.
4. Touch Yes.
Pair the phone again and the device
will have to index again.
Bluetooth
®
Audio and Voice
Recognition
See Bluetooth Audio on page 7-37
and Voice Recognition on page 7-59
for information using voice
recognition with Bluetooth
®
audio.
Make sure all devices have the
latest software downloaded.
Auxiliary Devices
This vehicle has an auxiliary input
jack in the centre console. Possible
auxiliary audio sources include:
.
Laptop computer
.
MP3 player
This jack is not an audio output. Do
not plug headphones into the
auxiliary input jack. Set up any
auxiliary device while the vehicle is
stationary and/or in P (Park).
Connect a 3.5 mm cable from the
auxiliary device to the auxiliary input
jack. When a device is connected,
the system automatically begins
playing audio from the device over
the vehicle speakers.
If an auxiliary device has already
been connected, but a different
source is currently active, do one of
the following:
.
Press SRCE to scroll all of the
available audio source screens,
until the AUX source screen is
selected.
.
Say “Play Front AUX” using
voice recognition to play the
auxiliary device. See Voice
Recognition on page 7-59.
Bluetooth Audio
If equipped, music may be played
from a paired Bluetooth
®
device.
See “Pairing a Phone/Device” under
Bluetooth on page 7-66.
To play music through a Bluetooth
®
device:
1. Power on the device, pair, and
connect the device.