Holman 40070 - Step 1: Find Location; Step 2: Attach Drawer Unit

To Next Page

To Previous Page

Instructions – 40070, 40080, 40090

For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 2

Hardware

Note: The following instructions show Installation of 40070 2-drawer unit. The installation is the

same for the 3-drawer and 4-drawer units.

Step 1 – Find Location

 Find desired location for drawer unit to be installed.

 For easy no-drill installation, slots have been provided

in most Holman shelves that correspond to holes in the

bottom of the drawer unit.

 If the slots provided do not line up with holes in the

bottom of the drawer unit, mark desired location and

drill with a 5/16” bit.

Step 2 – Attach

Bolt drawer unit to shelf using 1/4 x 1/2” round head bolts.