EasyManuals Logo

Holybro SiK Telemetry Radio V3 User Manual

Holybro SiK Telemetry Radio V3
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P a g e | 1 www.holybro.com
SKU17022,17023
SiK Telemetry Radio V3
Quick Start Guide
Overview
This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform
that typically allows ranges of better than 300m “out of the box” (the range can be extended
to several kilometres with the use of a patch antenna on the ground).
This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the
easiest ways to setup a telemetry connection between your Autopilot and a ground station.
It uses open source firmware which has been specially designed to work well with MAVLink
packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4
Autopilot.
The radios can be either 915Mhz or 433Mhz and you should purchase the model which is
appropriate for your country/region.
Note:
This radio does not support firmware upload via Mission Planner 1.3.75 or order. Please use
Mission Planner 1.3.75.1 or newer if firmware upload is needed.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Holybro SiK Telemetry Radio V3 and is the answer not in the manual?

Holybro SiK Telemetry Radio V3 Specifications

General IconGeneral
BrandHolybro
ModelSiK Telemetry Radio V3
CategoryRadio
LanguageEnglish