Why does my HOLZMANN MASCHINEN HOB 260ECO Planer not start?
If your HOLZMANN MASCHINEN Planer doesn't start, or shuts down automatically, the possible causes include a power supply outage (check the fuse), a damaged or incorrectly connected extension cable (check the plug or cable), or a damaged switch or motor. In the latter case you should contact customer support.
What to do if my HOLZMANN MASCHINEN HOB 260ECO stops during operation?
If your HOLZMANN MASCHINEN Planer stops during operation, this could be due to a blunt blade (check the blade), feeding speed being too high (work with lower feeding speed), or the motor protection being triggered (let the motor cool down).
How to fix a bad surface condition after using HOLZMANN MASCHINEN Planer?
A bad surface condition after using the HOLZMANN MASCHINEN Planer can be caused by a blunt blade (check the blade) or uneven feed of the workpiece (feed workpiece evenly and with constant pressure).
Why is my HOLZMANN MASCHINEN Planer vibrating during operation?
If your HOLZMANN MASCHINEN Planer vibrates during operation, it could be due to a wrongly adjusted blade (check the setting of the blades) or the ground not being flat, or base feet wrongly adjusted (set the base feet correctly).
What to do if workpiece clamps during thicknessing with HOLZMANN MASCHINEN HOB 260ECO Planer?
If the workpiece clamps during thicknessing with your HOLZMANN MASCHINEN Planer, it may be because the cutting depth is too high (set the correct cutting depth and operate in more steps) or the thicknessing table is dirty (clean and apply the table surface with lubricant).
Why is the surface cracked after using HOLZMANN MASCHINEN HOB 260ECO?
A cracked surface after using the HOLZMANN MASCHINEN Planer can occur if the workpiece was processed against the direction of growth (proceed the workpiece in opposite direction) or the cutting depth is too high (set the correct cutting depth and operate in more steps).
How to prevent a rough surface when using HOLZMANN MASCHINEN HOB 260ECO?
A rough surface after operating your HOLZMANN MASCHINEN Planer may be caused by the workpiece being too moist. Use a drier workpiece to resolve this issue.
General| Brand | HOLZMANN MASCHINEN |
|---|---|
| Model | HOB 260ECO |
| Category | Planer |
| Language | English |
Specifies the authorized purpose and limitations of the machine's operation.
Lists actions and conditions that are forbidden during machine operation.
Detailed safety guidelines and precautions for operating the machine.
Identifies potential residual risks and hazards associated with machine use.
Details electrical connection requirements and safety checks for the machine's power supply.
Description of the machine's safety features and their functions.
Common problems, causes, and solutions for machine issues.
To Next Page
