Why do Holzstar DKS 504 Vario saw blades break?
Saw blades may break due to several reasons: the voltage being too high or too low, the saw blade being worn out or twisted, or using the wrong saw blade. To resolve this: 1. Ensure the voltage is correct. 2. Reduce the feed rate. 3. Avoid applying lateral pressure on the saw blade. 4. Use fine saw blades for thin workpieces and coarse saw blades for thicker workpieces.
What to do if the Holzstar DKS 504 Vario saw blades loosen while working?
If the saw blade loosens during operation, it might not be correctly adjusted. To fix this, loosen the saw blade retaining bolt and reorient the bracket.
General| Brand | Holzstar |
|---|---|
| Model | DKS 504 Vario |
| Category | Power Tool |
| Language | English |
Copyright information regarding the operating instructions.
Information on how to contact customer service for assistance.
Manufacturer's liability disclaimer for the operation manual.
Explanation of symbols used to indicate risk levels in safety instructions.
Defines operator roles and outlines their legal obligations for machine use.
Details the necessary qualifications for personnel operating the machine.
Lists essential personal protective equipment (PPE) for safe operation.
Explains the importance and meaning of safety labels on the machine.
Provides general safety rules and guidelines for operating the machine.
Presents detailed technical specifications of the JIG SAW DKS 504 Vario.
Details the information found on the machine's type plate.
Instructions for checking and handling transport damage.
Information on the recyclability of packaging materials.
Guidelines for storing the machine safely.
Explains the machine's components through an illustration.
Lists the items included in the delivery of the JIG SAW.
Guidance on choosing the correct saw blade and stroke speed.
Lists recommended optional accessories for the machine.
Specifies environmental conditions for machine installation.
Instructions for physically setting up and securing the JIG SAW.
Advice on selecting the appropriate saw blade for different materials and cuts.
Step-by-step guide for inserting pinless saw blades.
Procedure for properly tensioning and clamping the saw blade.
Instructions for tilting the saw table to different angles.
Guide to mounting essential safety and work support components.
Steps to ensure the saw blade and table are properly aligned.
How to set and use the angle scale for accurate cuts.
Instructions for safely connecting the machine to the power supply.
Step-by-step guide for the general operating workflow of the JIG SAW.
Instructions for performing internal cuts without damaging the workpiece exterior.
Guidance on safely cutting multiple stacked workpieces.
How to connect and use external tools with the JIG SAW.
Procedure for changing the tool or accessory attached to the machine.
Safety and operational guidelines for using the hand tool accessory.
Steps for cleaning and maintaining the machine after use.
Instructions for lubricating the machine's bearings and pivot points.
Procedure for checking and replacing carbon brushes.
Steps for changing the drive belt of the machine.
General guidance on maintenance and when to contact service.
Steps for safely decommissioning the machine before disposal.
Guidelines for the proper disposal of electrical components.
Instructions for the disposal of used lubricants.
Information on disposing of the product via local collection points.
Information required when ordering spare parts for the machine.
Exploded view diagram showing all spare parts of the JIG SAW DKS 504 Vario.
To Next Page