INSERTING AND REMOVING THE FLAG
Assemble the two sections of the flag pole together. Insert the
flagpole into the sewn sleeve on the left rear corner of the
trailer.
CAUTION!
Always use the safety flag to maximize your visibility to
other vehicles sharing the road or path.
EXTENDING AND FOLDING THE HITCH ARM
Tip the trailer back on its frame so the underside is fully visible.
Remove the safety pin, rotate the hitch arm upward until fully
extended. Reinsert the safety pin and lock the spring clip.
For folding and storage, reverse the process and be sure to
fasten the hitch arm fully.
CAUTION!
Do not use the trailer without proper installation of the safety
pin.
To Next Page
Loading...