⚫ Do not unplug by pulling on the power cord.
⚫ Do not use an extension cord or an adapter plug.
⚫ Do not put objects on the unit.
⚫ Do not climb or sit on the unit.
⚫ Do not insert fingers or other objects into the air outlet.
⚫ Do not touch the air inlet or the aluminum fins of the unit.
⚫ Do not operate the unit if it is dropped, damaged or showing signs of product malfunction.
⚫ Do not clean the appliance with any chemicals.
⚫ Ensure the unit is far away from fire, inflammable, or explosive objects.
⚫ The unit shall be installed in accordance with national wiring regulations.
⚫ Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacture.
⚫ The appliance shall be stored in a room without continuously operation sources (for example:
open flames, an operating gas appliance or an operating electric heater).
⚫ The appliance shall be stored so as to prevent mechanical damage from occurring.
⚫ Do not piece or burn, even after use.
⚫ Be aware that refrigerants may not contain an odour.
⚫ Pipe-work shall be protected from physical damage and shall not be installed in an
unventilated space, if that space is smaller than 4m².
⚫ Compliance with national gas regulations shall be observed.
⚫ Keep any required ventilation openings clear of obstruction.
⚫ The appliance shall be stored in a well-ventilated area where the room size corresponds to the
room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant circuit should
hold a current valid certificate from an industry-accredited assessment authority, which authorizes
their competence to handle refrigerants safely in accordance with an industry, recognized
assessment specification.
To Next Page
Loading...
Need help?
General
