Need help?Do you have a question about the Home Depot Jackson and is the answer not in the manual?
Attach Table Legs (C) to Table Top (A) using M6x15mm Allen Head Bolt (G), M6 Washer (E) with Allen Wrench (D). Do not tighten fully.
Attach connector ring (B) to Table Legs (C) using M6x25mm Allen Head Bolt (F) and M6 Washers (E) with Allen Wrench (D). Check alignment and tighten.
Carefully turn the table upright. Warning: Do not climb on the table surface.
Attach Table Legs (C) to Table Top (A) using M6x15mm Allen Head Bolt (G), M6 Washer (E) with Allen Wrench (D). Do not tighten fully.
Attach connector ring (B) to Table Legs (C) using M6x25mm Allen Head Bolt (F) and M6 Washers (E) with Allen Wrench (D). Check alignment and tighten.
Carefully turn the table upright. Warning: Do not climb on the table surface.
General| Brand | Home Depot |
|---|---|
| Model | Jackson |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
