EasyManua.ls Logo

Home HME020235N - Control Panel and Indicators

Home HME020235N
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
CONTROL PANEL
OPERATION
SWING BUTTON: Press to initiate the Auto swing
feature. When the operation is ON, you can choose to
press it to stop the Air Outlet Door at the desired angle.
A complete swing takes about 30 seconds for the Air
Outlet Door to move from the bottom to the top.
FAN BUTTON: Press to control the fan speed. Press to
select the fan speed; LOW, HIGH and AUTO. The fan
speed indicator light illuminates under different fan
settings except for AUTO speed. When you select AUTO
fan speed, all the fan indicator lights will turn dark.
TIMER BUTTON: Press it to initiate the AUTO ON start
time and AUTO OFF stop time program, in conjunction
with the + & - buttons. The timer on/off indicator light
will illuminate under the timer on/off settings.
SLEEP(ECO)/FILTER BUTTON: Press it to initiate the
SLEEP/ECO operation.
NOTE: After 250 hours of operation, the lter indicator
light will illuminate to remind you to clean the Air Filter
for more efcient operation. Press and hold this button
for 3 seconds to cancel the reminder.
MODE BUTTON: This button allows you to select the
appropriate operating mode. Each time you press the
button, a mode is selected in a sequence that goes
from AUTO, COOL, DRY and FAN. The mode indicator
light will illuminate under the different mode settings.
NOTE: On the DRY mode, you can adjust the humidity
for models with the humidity sensor.
UP (+) AND DOWN (-) BUTTONS: This button allows
you to adjust (increasing/decreasing) temperature
settings in 1°C/1°F increments in a range of 17°C/62°F
to 30°C/86°F, or the TIMER settings in a range of
0–24hrs. You can also adjust the humidity level in a
range of 35%RH (Relative Humidity) to 85%RH
(Relative Humidity) in 5% increments.
NOTE: To convert the displaying temperature between
Fahrenheit and Celsius, press and hold the Up and
Down buttons at the same time for 3 seconds.
POWER BUTTON: Press to power on/off.
LED DISPLAY: Shows the set temperature in °C or °F,
the Auto-timer settings, and the humidity settings.
When using DRY and FAN modes, it shows the room
temperature.
INDICATOR LIGHTS
Degrees Fahrenheit
High fan
Low fan
Sleep mode
Humidity
Timer on
Timer off
Dry mode
Auto mode
Fan mode
Cool mode
Degrees Celsius
Filter light
SWING
FAN
TIMER
SLEEP
MODE
POWER

Related product manuals