Home HME020235N - Operating Modes and Features

13
COOL OPERATION
-Press the MODE button until the "COOL" indicator light illuminates.
- Press the ADJUST button "+" or "-" to select your desired room temperature. The temperature can be set within
a range of 17°C~30°C / 62°F~86°F.
-Press the "FAN SPEED" button to choose the fan speed.
DRY OPERATION
-Press the MODE button until the "DRY" indicator light illuminates.
-Under this mode, you cannot select fan speed or adjust the temperature. The fan motor operates at LOW speed.
-Keep windows and doors closed for the best dehumidifying effect.
- You can set the humidity level as the unit has a humidity sensor. Put the Drain Hose in the Drain Outlet for the best dehumidifying effect.
You don't have to connect the duct to the window.
AUTO OPERATION
- When you set the air conditioner in AUTO mode, it will automatically select cooling or fan only operation, depending on what temperature
you have selected and the room's specic temperature.
-The air conditioner will adjust the room temperature automatically to your set temperature.
-Under AUTO mode, you are not able to select the fan speed.
FAN OPERATION
-Press the MODE button until the "FAN" indicator light illuminates.
-Press the FAN SPEED button to choose the fan speed. The temperature cannot be adjusted.
-Do not put the duct to the window.
TIMER OPERATION
- When the unit is on, press the Timer button to initiate the Auto-off program, and the TIMER OFF indicator light will illuminate. Press the
UP or DOWN button to select the desired Auto-off time. Press the TIMER button again within 5 seconds, and the Auto-on program will be
initiated and the TIMER ON indicator light will illuminate. Press the UP or Down button to select the desired Auto-on time.
-When the unit is off, press the Timer button to initiate the Auto-on program. Press it again within ve seconds to initiate the Auto-off program.
- Press and hold the UP or DOWN button to change the Auto time by 0.5-hour increments for up to 10 hours, then at 1-hour increments
for up to 24 hours.
-If there is no operation in 5 seconds, the system will automatically revert back to display the previous temperature setting.
-Turning the unit ON or OFF at any time or adjusting the Timer setting to 0.0 will cancel the Timer program.
-When a malfunction occurs, the Timer program will be canceled.
SLEEP/ECO OPERATION
- By pressing this button, the selected temperature will increase (cooling) or decrease (heating) by 1°C/2°F in 30 minutes. The temperature will
then increase (cooling) or decrease (heating) by another 1°C/2°F after an additional 30 minutes. This will be maintained for 7 hours before it
returns to the original temperature. The unit will continue to operate as originally programmed.
NOTE: This feature is unavailable under FAN or DRY mode.
OPERATION INSTRUCTIONS
OPERATION
OTHER FEATURES
AUTO-RESTART
If the unit shuts off unexpectedly due to a power outage, it will restart with the previous function setting automatically
when the power resumes.
WAIT FOR 3 MINUTES BEFORE RESUMING OPERATION
After the unit stops working, do not restart operation for the next 3 minutes to protect the unit.
Operation will automatically start again after 3 minutes.
AIR FLOW DIRECTION ADJUSTMENT
The Air Outlet Door can be adjusted automatically. Adjust the air ow direction automatically:
-When the Power is ON, the Air Outlet Door opens fully.
- Press the SWING button on the panel or Remote Control to initiate the Auto swing feature.
The Air Outlet Door will swing up and down automatically.
-Please do not adjust the Air Outlet Door manually.
NOTE: The unit can be operated by use of the control panel or the Remote Control.
Expect a 1-second delay when using the Remote Control to operate.