Home HME020371N - Timer and Child-Lock Features; Full Bucket Alarm

13
Operating Instructions
Timer buon
This timer can be used to delay the appliance start-up or shutdown, this avoids wasting electricity by
optimizing operating periods.
• Programming start-up
1. Turn on the appliance, choose the mode you want, for example Dehumidify mode, high fan speed.
Turn off the appliance.
2. Press the TIMER button, the screen starts to ash, press the UP/DOWN button to adjust the set time
from 0.5-24 hours.
3. In 5 seconds if there is no operation, the timer will be activated. The TIMER indicator lights up.
4. To cancel the timer, press the TIMER button again. When canceled, the TIMER indicator will light off.
• Programming shut down
1. When the appliance is running, press the TIMER button. The screen starts to ash.
2. Press the UP/DOWN button to adjust the set time from 0.5-24 hours.
3. In 5 seconds if there is no operation, the timer will be activated. The TIMER indicator lights up.
4. To cancel the timer, press the TIMER button again. When canceled, the TIMER indicator will light off.
Child-lock
• Lock the control panel to prevent someone from changing the settings accidentally.
• To lock the control panel, press and hold the TIMER button for 3 seconds. When nished, the LOCK
indicator will light up.
• To unlock the control panel, press and hold the TIMER button for 3 seconds.
Alarm of full bucket
- When the bucket is full, the compressor will shut off, and the fan will stop after a few minutes. The unit
will beep and the Full BUCKET indicator starts ashing.
- The bucket should be cleaned every week to prevent the growth of mould, mildew and bacteria. Use a
mild detergent to clean the bucket.
- Dry the bucket completely and place it back inside unit.
The bucket
without
handle
The bucket
with handle