29
Troubleshooting
The unit doesn't work
continuously
The unit is preset with ECO on
for energy saving. It will shut off
the compressor and fan when the
preset temperature reaches
• Press the ECO button to deactivate the
energy saving mode
The room temperature
is higher than the set
temperature on the
unit
The temperature displayed on the
unit is the SET temperature (not
the room temperature)
• Check the room temperature on the
APP
The room thermometer is far away
from the unit. The unit is on ECO
mode and the compressor is off
when the temperature sensor
reaches the set temperature
• Turn off the ECO mode
• Use the "Follow me" function on the
remote control. Place the remote
control near the room thermometer and
direct it to the unit
To Next Page
Loading...
