Digital Control for a Homecraft Sauna Heater:
A Digital wall-mount Sauna Control panel is precise and offers features for the safe operation of your
sauna heater. A normal sauna control is a Class-2 24volt circuit and does not require a GFI breaker. (**
usually a GFI breaker will not work with our sauna heaters) Be sure to check with your
local inspection authority.
The Homecraft Tke2-2 control will fit a standard 2-gang electrical box to
house the digital wall-mount control panel. This box should be mounted on the outside wall of the
sauna.
Connect the appropriate 18/4 wire from the touchpad to the contactor box
R = Red
B = Brown
G = Green
W= White
Connect the Thermistor inside the
sauna room above or in-line with the
heater 2.5'’ from the ceiling. Connect
the thermistor to the 18/2 wire and
connect to the back of the touchpad.
To Next Page
Loading...